Quick Solutions to Eliminate Vape Coil Burning Taste
Experiencing a burning taste while vaping can be frustrating and unpleasant. This common issue often stems from a variety of factors, including improper priming, insufficient e-liquid, or excessive power settings. Fortunately, there are several effective methods to address this problem quickly. In this article, we’ll explore practical steps to fix a burnt vape coil and restore a smooth, flavorful vaping experience.
Understanding Why Vape Coils Taste Burnt
Before diving into solutions, it’s helpful to understand why vape coils develop a burnt taste. The coil inside your device consists of a wire wrapped around a wicking material (usually cotton). When you fire the device, the coil heats up, vaporizing the e-liquid absorbed by the wick. If the wick isn’t saturated properly, the cotton can singe or burn, resulting in a harsh, unpleasant taste. Common causes include:
- Dry Hits: Occurs when the wick isn’t adequately saturated with e-liquid.
- Chain Vaping: Frequent, rapid puffs prevent the wick from re-saturating.
- High Wattage: Power settings that are too high for the coil’s resistance can overheat the coil.
- Old Coil: Coils degrade over time and need replacement.
- Thick E-Liquids: High VG (vegetable glycerin) juices may not wick efficiently in some devices.
Step-by-Step Fixes for a Burnt Vape Coil
1. Prime Your Coil Properly
Priming is the process of saturating the coil’s wick with e-liquid before use. To prime correctly:
- Drip a few drops of e-liquid directly onto the cotton exposed in the coil’s openings.
- Install the coil into the tank and fill it with e-liquid.
- Let it sit for 5–10 minutes to allow the wick to fully absorb the juice.
- Take a few dry pulls (inhaling without firing the device) to draw liquid into the coil.
2. Reduce Wattage
If your device allows adjustable wattage, lower the power setting. Start at the lower end of the coil’s recommended range (printed on the coil or packaging) and gradually increase until you find a satisfying balance of flavor and vapor production.

3. Avoid Chain Vaping
Give your device a break between puffs. Chain vaping can cause the wick to dry out faster than it can re-saturate. Wait 15–30 seconds between hits to allow the coil to cool and the wick to absorb more e-liquid.
4. Check E-Liquid Levels
Never let your e-liquid level drop below the coil’s wicking ports. Top off your tank regularly to ensure the wick remains submerged.
5. Use Thinner E-Liquids
If you frequently experience burning tastes, try switching to an e-liquid with a higher PG (propylene glycol) ratio. PG is thinner than VG and wicks more efficiently. A 50/50 VG/PG blend is often ideal for many tanks.
6. Clean the Coil (Temporary Fix)
For mildly burnt coils, cleaning might help:
- Remove the coil from the tank.
- Rinse it under warm water to remove residual e-liquid and debris.
- Let it dry completely for 24 hours.
- Re-prime and reinstall the coil.
Note: This is a short-term solution; replacing the coil is always better.
7. Replace the Coil
If the burning taste persists, the coil is likely damaged and needs replacement. Coils typically last 1–2 weeks, depending on usage and e-liquid type. Always keep spare coils on hand.
8. Ensure Proper Tank Assembly
Loose or incorrectly assembled tank components can cause wicking issues. Disassemble your tank, check for damaged O-rings, and reassemble it carefully to ensure a proper seal.
Preventive Tips to Avoid Future Burnt Tastes
- Prime Every New Coil: Never skip priming, even if you’re in a hurry.
- Stay Within Recommended Wattage: Respect your coil’s power limits.
- Store Device Properly: Keep your vape upright to prevent leaks and ensure consistent wicking.
- Use Quality E-Liquids: Avoid sugary or dark juices that can gunk up coils faster.
Conclusion
A burnt taste doesn’t have to ruin your vaping experience. By priming coils correctly, adjusting wattage, avoiding chain vaping, and maintaining your device, you can quickly resolve—and prevent—this common issue. If all else fails, replacing the coil is the most reliable solution. Happy vaping!
Tags: #VapeTips #ECigaretteMaintenance #VapingProblems #CoilPriming #VapeCoilBurning #HowToVape #VapingGuide #ECigFix